Front Seat Linkage Disassembly/Reassembly - 8-Way Power
Front Seat Linkage Disassembly/Reassembly - 8-Way PowerNOTE:
- Put on gloves to protect your hands.
- Before removing the front seat, raise the seat cushion to its maximum height.
- To remove the slide motor and slide gearbox, slide the front seat backward fully.
1. Disassemble the linkage as shown.
2. Reassemble the linkage in the reverse order of disassembly, and note these items:
- Replace the bushing with new ones.
- Before installing the slide motor and slidegearbox, align portion (A) as shown to align both slidegearbox positions.
- Apply multipurpose grease to the sliding and pivot portions.
- Check operation of the recline adjuster and slide/up-down adjusters.