Radiator Cooling Fan Motor: Service and Repair
Radiator and Fans ReplacementJ32A1 engine
1. Drain the engine coolant.
2. Remove the upper and lower radiator hoses.
3. Remove the ATF cooler hoses ('99 model)
4. Disconnect the fan motor connectors.
5. Remove the radiator upper brackets, then pull up the radiator.
6. Remove the fan shroud assemblies and other parts from the radiator.
7. Install the radiator in the reverse order of removal.
8. Set the upper and lower cushions securely.
9. Fill the radiator with engine coolant and bleed the air.
J32A2 engine
1. Drain the engine coolant.
2. Remove the upper radiator hose and lower radiator hose.
3. Disconnect the fan motor connectors.
4. Disconnect the radiator fan switch C connector.
5. Remove the radiator upper brackets, then pull up the radiator.
6. Remove the fan shroud assemblies and other parts from the radiator.
7. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
8. Fill the radiator with engine coolant and bleed the air.