Deploying Airbags/Tensioner (Outside Vehicle)

Airbag Disposal

Special Tool Required
Deployment Tool 07HAZ-SG00500

Before scrapping any airbags (including those in a whole vehicle to be scrapped), the airbags must be deployed. If the vehicle is still within the warranty period, the Acura Parts and Service Manager must give approval and/or special instructions before you deploy the airbags. Only after the airbags have been deployed (as the result of vehicle collision, for example), can they be scrapped. If the airbags appear intact (not deployed), treat them with extreme caution. Follow this procedure:

Deploying the Airbags Out of the Vehicle




If an intact airbag has been removed from a scrapped vehicle, or has been found defective or damaged during transit, storage or service, it should be deployed as follows:

1. Confirm that the special tool is functioning properly by following the check procedure or on the tool label.
2. Position the airbag face up, outdoors on flat ground at least 30 feet (10 meters) from any obstacles or people.
3. Follow steps 6,7, 8, and 9 or 7,8,9 and 10 of the in-vehicle deployment procedure.