Face Panel/Button Replacement

CAUTION:
- Before replacing face panel or buttons, discharge the static electricity (which accumulated on you when you removed the climate control unit) by touching the door striker or other body parts.
- Do not touch the electronic components on the printed circuit board in the climate control unit.

1. Remove the climate control unit.




2. Remove the temperature control and the fan control knobs.




3. Carefully remove the self-tapping screws and the rear cover.




4. Remove the self-tapping screws, then remove the clock and the display from the face panel.




5. If necessary, remove the buttons sequentially from left to right.
6. Install in the reverse order of removal. Make note of the following items.

NOTE:
- Do not kink or pull on the wires between the control unit and printed circuit board.
- After installation, operate the climate control unit to see whether it works properly.
- Run the self-diagnosis function to confirm that there are no problems in the system.