Instrument Panel Removal and Installation

CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

NOTE: Take care not to scratch the dashboard and related parts.






Instrument panel:

1. Remove the center air vent.
2. Remove the climate control unit and audio unit as an assembly.

NOTE: Do not disconnect the connectors.

3. Remove the dashboard lower cover and driver's switch trim.




4. Remove the screws, detach the clips, then carefully pull out the instrument panel in the numbered sequence. Disconnect the connector, then remove it.

NOTE: Release the adhesive at the left side of the skirt carefully.

5. Installation is the reverse of the removal procedure.

NOTE: Make sure the connectors are connected properly.