Countershaft: Specifications

Countershaft
Diameter of needle bearing contact area (clutch housing side
Standard or New 43.974 - 43.990 mm (1.7313 - 1.7319 inch)
Limit 43.92 mm (1.729 inch)
Diameter of distance collar contact area
Standard or New 42.975 - 42.991 mm (1.6919 - 1.6926 inch)
Limit 42.92 mm (1.690 inch)
Diameter of ball bearing contact area (transmission housing side)
Standard or New 30.002 - 30.015 mm (1.1812 - 1.1817 inch)
Limit 29.95 mm (1.179 inch)
Diameter of countershaft reverse gear
Standard or New 45.934 - 45.950 mm (1.8084 - 1.8091 inch)
Limit 45.88 mm (1.806 inch)
Run out
Standard or New 0.02 mm (0.001 inch) maximum
Limit 0.05 mm (0.002 inch)
35 mm shim-to-bearing inner race clearance
Standard or New 0.04 - 0.10 mm (0.0016 - 0.0039 inch)
Limit Adjust
Countershaft 1st gear
I.D.
Standard or New 57.010 - 57.029 mm (2.2445 - 2.2452 inch)
Limit 57.08 mm (2.247 inch)
End play
Standard or New 0.04 - 0.17 mm (0.002 - 0.007 inch)
Limit 0.28 mm (0.011 inch)
Thickness
Standard or New 22.91 - 22.99 mm (0.902 - 0.905 inch)
Limit 22.86 mm (0.900 inch)
Countershaft 2nd gear
I.D.
Standard or New 57.010 - 57.029 mm (2.2445 - 2.2452 inch)
Limit 57.08 mm (2.247 inch)
End play
Standard or New 0.04 - 0.17 mm (0.002 - 0.007 inch)
Limit 0.28 mm (0.011 inch)
Thickness
Standard or New 22.91 - 22.99 mm (0.902 - 0.905 inch)
Limit 22.86 mm (0.900 inch)
Countershaft reverse gear
I.D.
Standard or New 45.970 - 45.988 mm (1.8098 - 1.8105 inch)
Limit 46.04 mm (1.813 inch)
O.D.
Standard or New 51.987 - 52.000 mm (2.0467 - 2.0472 inch)
Limit 51.93 mm (2.044 inch)
Length 23.03 - 23.08 mm (0.907 - 0.909 inch)
Countershaft 2nd gear distance collar
I.D.
Standard or New 42.990 - 43.000 mm (1.6925 - 1.6929 inch)
Limit 43.05 mm (1.695 inch)
O.D.
Standard or New 51.989 - 52.000 mm (2.0468 - 2.0472 inch)
Limit 51.94 mm (2.045 inch)
Length 23.03 - 23.08 mm (0.907 - 0.909 inch)