Antilock Brake System
ABS DTC 24: Pulser1. Clear the DTC.
2. Test-drive the vehicle at 19 mph (30 km/h) or more.
Does the ABS indicator come on and are DTCs 21, 22, 23, 24 indicated?
YES-Go to step 3.
NO-The system is OK at this time.
3. Check the appropriate pulser gear for a chipped tooth (see table).
Is the pulser OK ?
YES-Check for loose ABS/TCS control unit connectors. If necessary, substitute a known-good ABS/TCS control unit, and recheck.
NO-Replace the driveshaft or the hub unit. (Chipped pulser gear)