Drain Channel

Drain Channel Replacement

1. Remove the moonroof glass.




2. With the moonroof wrench, move both glass brackets (A) to the position where the moonroof normally pivots down, and remove the screws securing the drain channel (B).
3. Release the drain channel (B) from both hooks (C) of the drain channel slider by pulling the drain channel forward.
4. Remove the drain channel.
5. Install the drain channel in the reverse order of removal, and note these items:
- Push the drain channel onto the hooks until a faint click is heard.
- Check the glass height adjustment.

6. Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray, or a car wash to test.