3rd Accumulator/End Cover Disassembly, Inspection & Reassembly

3rd Accumulator/End Cover Disassembly, Inspection, and Reassembly
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all passages.
2. Check all valves for free movement. If any fail to slide freely, refer to Valve Body Repair. Valve Body Repair
3. Replace the valve body as an assembly if any parts are worn or damaged.
4. Coat all parts with ATF during assembly.






Disassembly, Inspection, and Reassembly
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all passages.
2. Coat all parts with ATF during assembly.