Quarter Glass

Replacement

NOTE:
- Familiarize yourself with the glass replacement process
- The quarter glass adhesive needs to be cut from inside the vehicle with utility knife.
- If the molding is damaged, replace the quarter glass, molding, and clips as an assembly.
- If any of the clips are broken, the quarter glass can be reinstalled using butyl tape.

Parts Removal
First remove these items:
- B-pillar upper trim
- C-pillar trim
- Quarter window trim
- Rear side trim panel, as necessary
- Headliner, as necessary
- Roof drip molding




Glass Removal
From inside the vehicle, with a utility knife, carefully cut trough the adhesive all the way around while pulling rear portion of the headliner down or the upper portion of the rear side trim panel back as necessary.
- Put on gloves to protect your hands.
- Apply protective tape along the edge of the entire quarter glass opening.

Butyl Tape Installation:

Butyl Tape Installation
(For reinstallation of the quarter glass without clips)

Body Primer Application / Urethane Tape Installation:

Body Primer Application / Urethane Tape Installation
(For reinstallation of the quarter glass without clips)

Glass Primer And Adhesive Tape Application:

Glass Primer and Adhesive Tape Application