Hatchback
Rear Seat ReplacementHatchback
NOTE: Take care not to scratch the seat covers and body.
1. Fold the seat-backs forward.
2. Remove the clips, then fold the trunk mat.
3. Remove the clip pin on each side. Slide the seat-backs outward, then remove the seat-backs from the pivot bracket.
4. Remove the bolt, then remove the seat cushion.
5. If necessary, remove the seat latch from the seat-back and remove the striker.
CAUTION: Wear gloves to remove and install the seat latch and latch collar.
NOTE: When removing the striker, remove the side trim panel.
6. Installation is the reverse of the removal procedure.
NOTE:
- Make sure the seat-backs lock securely.
- If necessary, adjust the strikers.
- Before attaching the seat-backs and seat cushion, make sure there are no twists or kinks in the rear seat belts.
- When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.