Hatch Adjustment

Hatch

Adjustment

NOTE:
- Before adjusting the hatch, loosen each bolt and nut slightly.
- Do not install the support struts.

1. Adjust the hatch hinges right and left, as well as fore and aft, by using the elongated holes.
2. Turn the hatch edge cushions, as necessary, to make the hatch fit flush with the body at each side.
3. Adjust the hatch fit to the hatch opening by moving the striker.
4. Use shims, as necessary, to make the hatch fit flush with the body at the rear edge.




5. Adjust the hatch side stop so that there is no clearance between it and the body side stop, then tighten the mounting bolt (Type R).