Trunk / Liftgate Interior Trim Panel: Service and Repair

Trunk Trim

Replacement

NOTE: Take care not to bend or scratch the panels.

1. Fold the rear seat-back forward.




2. Lift the trunk mat, then remove the spare tire lid.




3. Remove the clips, then remove the rear trim panel.
4. Remove the clips, then remove the trunk side panel on each side.






NOTE: The clips on the trunk side panel can be removed in the same way as those on the rear trim panel.

5. Installation is the reverse of the removal procedure.

NOTE:
- If necessary, replace any damaged clips.
- When installing the rear trim panel, install the A clips as follows.




1. Pull the inner clip up as shown.




2. Install the clip in the rear trim panel, then push the inner clip until it's flush.