Antitheft and Alarm Systems: Service and Repair

1. Remove the dashboard lower cover and dashboard lower pad (see Steering Lock Removal/Installation).
2. Remove the dashboard brace (see Steering Lock Removal/Installation).
3. Disconnect the 3P connector from the immobilizer control unit. This harness is shielded and serves as a communication link; be careful not to damage it.

Immobilizer Receiver Replacement:

4. Remove the screw from the immobilizer receiver, then remove the receiver from the ignition key cylinder.
5. Install the new immobilizer receiver in the reverse order of removal.
6. After replacement, check the immobilizer system.