Rear Roof Stop Guide Replacement
Rear Roof Stop GuideReplacement
CAUTION: To prevent damage. place the roof on an appropriate pad.
1. Remove the roof.
2. Remove:
- Roof front trim
- Roof side trim
- Roof side lock
- Rear roof lock guide
3. Remove the rear end of the roof side seal.
NOTE: Take care not to damage the roof side seal. If it is damaged, replace it with new one.
4. Remove the screw, then remove the rear roof stop guide.
5. Installation is the reverse of the removal procedure.
NOTE:
- Install the roof side seal properly as described.
- Before installing the roof trim, install the roof on the body, then check that the seals fit flush.