Retractor Switch Removal

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in SRS before performing repairs or service.

1. Remove the dashboard lower cover, and disconnect the connectors.

Retractor Switch Removal:

2. Remove the dashboard lower pad.

Retractor Switch Removal:

3. Remove the tilt cover.

Retractor Switch Removal:

4. Remove the steering column covers.

Retractor Switch Removal:

5. Disconnect the 5P and 10P connectors from each switch.

Retractor Switch Removal:

6. Remove the six screws, then remove the instrument panel trim from the dashboard.
7. Remove the two screws, then remove the retractor switch from the instrument panel trim.