Trunk / Liftgate: Service and Repair
ReplacementNOTE: Put on gloves to protect your hands.
1. Using a clip remover, detach the clips, then remove the trunk lid trim (A).
2. Disconnect the trunk lid latch switch connector (A), and disconnect the trunk lid opener cable (B) from the trunk lid latch.
3. Detach the harness clips (C), then remove the wire harness (D) and trunk lid opener cable from the trunk lid.
4. Remove the bolts, then remove the trunk lid.
5. Install the trunk lid in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly and opener cable is connected properly, and the wire harness and opener cable are routed properly.
- Make sure the trunk lid opens properly and locks securely.
- Adjust the trunk lid alignment.