Door Lock Knob Switch
Keyless Entry/Security Alarm SystemDoor Lock Knob Switch Test
Driver's door:
1. Remove the driver's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals in each knob switch position according to the table.
4. If the continuity is not as specified, replace the door lock actuator.
Passenger's door:
1. Remove the passenger's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the terminals in each knob switch position according to the table.
4. If the continuity is not as specified, replace the door lock actuator.