Rear Seat-Back Cover Replacement
Rear Seat-back Cover ReplacementNOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
1. Remove the seat-back.
2. Remove the armrest.
3. Remove the screws, and detach the hooks (A), then remove the trunk pass-through cover (B).
4. Remove the screws, then remove the center belt guide (A).
5. Release all the clips (A) and hook strips (B), and fold back the seat-back cover (C).
6. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B) and fastener (C) (3.2TL-S), then remove the seat-back cover.
7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks, clips, and fasteners.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.