Audio Unit

Audio Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations, precautions and procedures before performing repairs or service.

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.

1. Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
2. Remove the rear console.
3. Remove the console panel.




4. Remove the six mounting screws, disconnect the audio unit connectors (A), climate control unit connectors (with Navigation) (B) and the antenna lead (C), then remove the audio unit (D).




5. Remove the climate control unit (with Navigation) or CD console box (without Navigation).
6. Install in the reverse order of removal, and note these items:

- Make sure the audio unit and climate control panel connectors are plugged in properly, and the antenna lead is connected properly.
- Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.