Rear Seat-Back Cover

Rear Seat-back Cover Replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the seat-back.
2. Remove the armrest.




3. Remove the screws (A), and detach the hooks (B), then remove the trunk pass-through cover (C).
4. Release all the clips (D) and hook strips (E), and fold back the seat-back cover (F).




5. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B) and fasteners (C), then remove the seat-back cover.
6. Install the seat-back cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners, hooks and clips.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.