Front Seat Linkage Disassembly/Reassembly - 4-Way Power
Front Seat Linkage Disassembly/Reassembly - 4-Way PowerNOTE:
- Put on gloves to protect your hands.
- To remove the slide motor and slide gearbox, slide the front seat backward fully.
Disassemble the linkage as shown.
Reassemble the linkage in the reverse order of disassembly, and note these items:
- Replace the push nut with a new one.
- Before installing the slide motor and slide gearbox, align portion (A) as shown to align both slide gearbox positions.
- Apply multipurpose grease to the sliding and pivot portions of the linkage.
- Check operation of the recline and slide adjusters.
- If you replaced the rear seat access cable with a new one, adjust it.