Programming and Relearning

Neutral Position Memorization
Service Check Signal (SCS) Circuit Method:

NOTE: To ensure accuracy, the vehicle must be level.

1. Clear the DTC.
2. Short the Service Check Signal circuit.
3. Release the parking brake.
4. Press the brake pedal, and hold it.
5. Turn the ignition switch ON (II).
6. After the ABS indicator goes off, apply the parking brake, release the parking brake, and apply it again.
7. The VSA activation indicator blinks twice in 2 seconds, and the indicator goes off. If the indicator does not go off, repeat from step 1.
8. Turn the ignition switch OFF, then remove the Honda PGM Tester from the data link connector.

Honda PGM Tester Method:
Clear the DTC. The VSA system is automatically neutralized when the DTC is cleared with the PGM Tester.