Exhaust System: Testing and Inspection

Tailpipe Emissions Test

1. Start the engine. Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle.
2. Connect a tachometer.
3. Check and, if necessary, adjust the idle speed.
4. Warm up and calibrate the CO meter according to the meter manufacturer's instructions.
5. Check idle CO with the headlights, heater blower, rear window defogger, cooling fan, and air conditioner off.

On Canadian models, pull the parking brake lever up, start the engine, then check that the headlights are off.

The CO meter should indicate 0.1 % maximum.