Clutch Disc, Clutch Plate Replacement

NOTE: The clutch discs and clutch plates should be replaced as a set.

1. Remove the clutch discs and clutch plates.
2. Soak the clutch discs for five minutes in transmission oil.








3. Install the clutch discs, clutch plates, and a standard shim.

NOTE: Position the 112 mm thrust shim with the thickness size mark facing away from the clutch discs.

4. Install the differential housing. Tighten the bolts evenly in several steps, then torque them in a crisscross pattern.
- Torque: 39 Nm (29 ft. lbs.).
5. Make sure the preset torque is within the standard.
6. If preset torque is beyond the standard, replace the 112 mm thrust shim as necessary.