Trunk / Liftgate Handle: Service and Repair

Hatch Handle Replacement

NOTE: Put on gloves to protect your hands.

1. Remove the hatch trim panel.




2. Using a flat-tip screwdriver wrapped with protective tape, gently pry out the hatch handle cover (A) to detach the hook (B) from each side.
3. Remove the nuts, and pull the hatch handle (C) out through the hole of the hatch. Take care not to bend the hatch opener cable (D).




4. Disconnect the hatch opener cable (A) from the hatch handle (B), then remove the handle.
5. Install the handle in the reverse order of removal, and note these items:
- Make sure the hatch opener cable is connected securely.
- Make sure the hatch opens properly.