| M/T differential carrier | Pinion shaft contact area I.D. | Standard or new | 18.010 - 18.028 mm |
| Carrier-to-pinion shaft clearance | Standard or new | 0.027 - 0.057 mm |
| | Service limit | 0.1 mm |
| Driveshaft contact area I.D. | Standard or new | 28.025 - 28.045 mm |
| M/T differential pinion gear | Backlash | Standard or new | 0.05 - 0.15 mm |
| I.D. | Standard or new | 18.042 - 18.066 mm |
| Pinion gear-to-pinion shaft clearance | Standard or new | 0.059 - 0.095 mm |
| | Service limit | 0.15 mm |
| 80 mm shim | 80 mm shim-to-bearing outer race clearance in transmission housing | Standard or new | 0 - 0.10 mm |
| | Service limit | Adjust |