Standards and Service Limits

Wheel alignment	Camber	Front		0 deg 00' +/- 45'
		Rear		-0 deg 45' +/- 45'
	Caster	Front		1 deg 30' +/- 1 deg
	Total toe	Front		0 +/- 3 mm
		Rear		IN 2 [+2/-1] mm
	Front wheel turning angle	Inside wheel		35 deg 00' +/- 2 deg
		Outside wheel		28 deg 00' (Reference)
Wheel	Aluminum wheel runout	Axial	Standard or new	0 - 0.7 mm
			Service limit	2.0 mm
		Radial	Standard or new	0 - 0.7 mm
			Service limit	1.5 mm
	Steel wheel runout	Axial	Standard or new	0 - 1.0 mm
			Service limit	2.0 mm
		Radial	Standard or new	0 - 1.0 mm
			Service limit	1.5 mm
Wheel bearing	End play	Front		0 - 0.05 mm
		Rear		0 - 0.05 mm