Part 2 of 2

Mainshaft 4th and 5th gears distance collar	I.D.		Standard or new	32.00 - 32.01 mm
			Service limit	32.02 mm
	O.D.		Standard or new	38.989 - 39.000 mm
			Service	38.94 mm
	Length	A	Standard or new	51.95 - 52.05 mm
		B	Standard or new	24.03 - 24.08 mm
MBS distance collar (5 speed model only)	I.D.		Standard or new	28.00 - 28.01 mm
			Service limit	28.02 mm
	Length		Standard or new	24.03 - 24.08 mm
Mainshaft 6th gear distance collar (6 speed model only)	I.D.		Standard or new	28.00 - 28.01 mm
			Service limit	28.02 mm
	O.D.		Standard or new	34.989 - 35.000 mm
			Service limit	34.940 mm
	Length		Standard or new	24.03 - 24.08 mm
Reverse idler gear	I.D.		Standard or new	20.016 - 20.043 mm
			Service limit	20.90 mm
	Gear-to-reverse ger shaft clearance		Standard or new	0.036 - 0.084 mm
			Service limit	0.16 mm
Synchro ring (5 speed model only)	Ring-to-gear clearance	Ring pushed against gear	Standard or new	0.70 - 1.49 mm
			Service limit	0.4 mm
Double cone synchro (6 speed model only)	Outer synchro ring-to-synchro cone clearance	Ring pushed against gear	Standard or new	0.70 - 1.19 mm
			Service limit	0.3 mm
	Synchro cone-to-gear clearance	Ring pushed against gear	Standard or new	0.50 - 1.04 mm
			Service limit	0.3 mm
	Outer synchro ring-to-gear cone clearance	Ring pushed against gear	Standard or new	0.95 - 1.68 mm
			Service limit	0.6 mm
Triple cone synchro	Outer synchro ring-to-synchro cone clearance	Ring pushed against gear	Standard or new	0.70 - 1.19 mm
			Service limit	0.3 mm
	Synchro cone-to-gear clearance	Ring pushed against gear	Standard or new	0.50 - 1.04 mm
			Service limit	0.3 mm
	Outer synchro ring-to-gear cone clearance	Ring pushed against gear	Standard or new	0.95 - 1.68 mm
			Service limit	0.6 mm
Shift fork	Finger thickness		Standard or new	7.4 - 7.6 mm
	Fork-to-synchro sleeve clearance		Standard or new	0.35 - 0.65 mm
			Service limit	1.0 mm
Reverse shift fork	Finger thickness		Standard or new	13.4 - 13.7 mm
	Fork-to-reverse idler gear clearance		Standard or new	0.20 - 0.59 mm
			Service limit	1.3 mm
Shift arm	I.D.		Standard or new	13.973 - 14.000 mm
	Shift fork diameter at contact area		Standard or new	16.9 - 17.0 mm
	Shift arm-to-shift lever clearance		Standard or new	0.2 - 0.5 mm
			Service limit	0.62 mm
Select lever	Finger width		Standard or new	14.85 - 14.95 mm
Shift lever	Shaft-to-select lever clearance		Standard or new	0.05 - 0.25 mm
			Service limit	0.50 mm
	Groove (to select lever)		Standard or new	15.00 - 15.10 mm
	Shaft-to-shift arm clearance		Standard or new	0.013 - 0.07 mm
			Service limit	0.1 mm
M/T differential carrier	Pinion shaft contact area I.D.		Standard or new	18.010 - 18.028 mm
	Carrier-to-pinion shaft clearance		Standard or new	0.027 - 0.057 mm
			Service limit	0.1 mm
	Driveshaft contact area I.D.		Standard or new	28.025 - 28.045 mm
M/T differential pinion gear	Backlash		Standard or new	0.05 - 0.15 mm
	I.D.		Standard or new	18.042 - 18.066 mm
	Pinion gear-to-pinion shaft clearance		Standard or new	0.059 - 0.095 mm
			Service limit	0.15 mm
80 mm shim	80 mm shim-to-bearing outer race clearance in transmission housing		Standard or new	0 - 0.10 mm
			Service limit	Adjust