Displaying & Reading Trouble Codes

Displaying the Diagnostic Trouble Code (DTC)

1. Turn the ignition switch OFF, and move the seat to a non-memorized position.




2. Press the MEMO button (A) and both position buttons (B) at the same time, and hold them.
3. Turn the ignition switch ON (II), and wait at least one second, then release the three buttons.
4. After one second, the position button indicators (C) will blink to show the DTC.

DTC Indications
No System Problem Pattern:




If there is no DTC stored, the indicators blink only once (three seconds).

System Problem Pattern:




If a system problem occurs and a DTC is stored, the indicators show the DTC. The first digit is indicated by the number of long (one second) blinks, and the second digit is indicated by the number of short (0.26 second) blinks. There is a three second break between each DTC when there are multiple DTCs.