Power Mirror

Power Mirror Replacement

NOTE: To avoid scratching the door, be sure to hold the mirror while removing or installing the nuts.

1. Lower the door glass fully.




2. Carefully detach the clips (A) and release the hooks (B), then pry out the mirror mount cover (C) by hand. Disconnect the door tweeter connector (D).
3. Remove the door panel (E).
4. Disconnect the connectors (F), and remove the nuts (G) securing the mirror (H).
5. While holding the mirror, squeeze and push out the clip (I), and remove the mirror. Take care not to scratch the door.
6. Install the mirror in the reverse order of removal, and note these items:
- Replace any damaged clips with new ones.
- Make sure the connectors are plugged in properly.