Front Seat Linkage Disassembly/Reassembly - 8-Way Power
Front Seat Linkage Disassembly/Reassembly - 8-Way PowerNOTE:
- Put on gloves to protect your hands.
- Before removing the front seat, raise the seat cushion to its maximum height.
- To remove the slide motor and slide gearbox, slide the front seat backward fully.
Disassemble the linkage as shown.
Reassemble the linkage in the reverse order of disassembly, and note these items:
- Replace the bushing and push nut with new ones.
- Before installing the slide motor and slide gearbox, align portion (A) as shown to align both slide gearbox positions.
- Apply multipurpose grease to the sliding and pivot portions.
- Check operation of the recline adjuster and slide/up-down adjusters.
- If you replaced the rear seat access cable with a new one, adjust it.