Wiper Motor: Service and Repair

Wiper Motor Replacement




1. Remove the nuts (A) and remove the windshield wiper arms (B).
2. Remove the hood seal and cowl cover.




3. Remove the bolt and windshield wiper linkage assembly (A).
4. Disconnect the 5P connector (B) from the wiper motor (C).




5. Scribe a line (A) across the link and windshield wiper linkage to show the original adjustment. Separate the windshield wiper linkage (B) from the wiper motor (C).
6. Install in the reverse order of removal, and note these items:

- Grease the moving parts.
- Before reinstalling the wiper arms, turn the wiper switch ON, then OFF to return the wiper shafts to the park position.
- If necessary, replace any damaged clips.
- Check the wiper motor operation.