Ignition Switch: Service and Repair

Replacement

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS section before performing repairs or service.

1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable.
3. Remove the steering column covers.
4. Insert the ignition key, and turn it to "0".




5. Remove the screws (A), and replace the electrical switch (B).
6. Install the switch in the reverse order of removal.
7. After reconnecting the battery, enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station presets.