Roof Lock Guides Replacement
Roof Lock GuidesReplacement
CAUTION: To prevent damage, place the roof on an appropriate pad.
1. Remove the roof.
2. Remove:
- Roof front trim
- Roof side trim
- Roof side lock
3. Remove the roof lock guides.
NOTE: Replace the roof lock guides with new ones.
4. Clean the roof lock guide installing portion of the roof side lock unit and rear roof stop guide with a sponge dampened in alcohol.
NOTE: After cleaning, keep oil, grease and water from getting on the surface.
5. Clean the new roof lock guides with alcohol.
6. Apply a light coat of silicone primer around the roof lock guide bonding surface.
Let the primer dry for at least 30 minutes.
7. Apply the silicone sealant to the roof lock guides.
8. Install the roof lock guides.
9. Scrape or wipe the excess sealant off with a soft shop towel dampened with alcohol.
10. Install the roof side lock.
NOTE: Make sure the roof side lock works smoothly.
11. Install the roof trim.