DTC 23
DTC 23: Pulser1. Clear the DTC.
2. Test-drive the vehicle at 19 mph (30 km/h) or more.
Does the ABS indicator come on, and are DTCs 21, 22, 23, 24 indicated?
YES - Go to step 3.
NO - The system is OK at this time.
3. Check the appropriate pulser gear for a chipped or damaged tooth (see table).
Is the pulser OK?
YES - Check for loose terminals in the ABS control unit 25P connector. If necessary, substitute a known-good ABS modulator-control unit, and recheck.
NO - Replace the driveshaft or hub unit. (Chipped pulser gear)