Rear Seat-Back Cover

Rear Seat-Back Cover Replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the seat-back.




2. Remove the screw (A) and clips (B), then remove the latch cover (C).




3. Release the fasteners (A) and hook (B).




4. Pull back the seat-back cover (A), and remove the clips (B).




5. Pull back the seat-back cover (A) all the way around. Remove the latch knob (B), and remove the latch collar (C) by pinching the end and pulling it out.
6. Remove the seat-back cover.
7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and clips.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.