Transmission End Crankshaft Seal Installation - In-Car
Transmission End Crankshaft Seal Installation - In-carSpecial Tools Required
^ Driver 07749-0010000
^ Oil seal driver attachment 9607ZAD-PNA0100
1. Dry the crankshaft oil seal housing.
2. Use the special tools to drive a new oil seal squarely into the block to the specified installed height.
3. Measure the distance between the crankshaft (A) and oil seal (B).
Oil Seal Installed Height: 5.5 - 6.5 mm (0.22 - 0.26 inch)