Headlamp Bulb: Service and Repair

Bulb Replacement

Headlight (low beam):




1. Left headlight Remove the battery, the washer tank neck (A) and the under-hood fuse/relay box bracket (B).




2. Disconnect the 3P connector (A) from the headlight.
3. Remove the rubber cover (B).
4. Pull the retaining spring (C) away from the bulb (D) then remove the bulb.
5. Install a new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.

Headlight (high beam):




1. Disconnect the 3P connector (A) from the headlight.
2. Remove the rubber cover (B).
3. Pull the retaining spring (C) away from the bulb (D), then remove the bulb.
4. Install a new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.