P0134

DTC P0134: A/F Sensor (Sensor 1) Signal Stuck Lean

1. Check for a loose A/F sensor (Sensor 1).

Is it loose in the exhaust pipe?

YES - Reinstall the A/F sensor (Sensor 1).

NO - Go to step 2.

2. Reset the ECM/PCM.
3. Start the engine. Hold the engine speed at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle for 2 minute.

Is DTC P0134 indicated?

YES - Replace the A/F sensor (Sensor 1).

NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the A/F sensor (Sensor 1) and the ECM/PCM.