P0341

DTC P0341: VTC Phase Gap

1. Reset the ECM/PCM.
2. Start the engine.

Is DTC P0341 indicated?

YES - Go to step 3.

NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the CMP sensor and at the ECM/PCM.

3. Check the VTC oil control solenoid valve.

Is the VTC oil control solenoid valve OK?

YES - Go to step 4.

NO - Clean the VTC oil control solenoid valve, or replace it.

4. Remove the head cover, and check the cam chain.

Is the cam chain OK?

YES - Go to step 5.

NO - Replace the cam chain.

5. Check the VTC actuator.

Is the VTC actuator OK?

YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM replace the original ECM/PCM.

NO - Replace the VTC actuator.