P0745

DTC P0745: Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid Valve A Circuit

NOTE: Record all freeze data before you troubleshoot.

1. Check whether the OBD II scan tool indicates another code.
Does the OBD II scan tool indicate another code?
YES - Perform the troubleshooting flowchart for the indicated code(s). Turn the ignition switch OFF, and go to step 4 after troubleshooting.
NO - Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid valve A.
4. Reset the PCM memory by removing the No. 6 ECU fuse (15 A) in the under-hood fuse/relay box for more then 10 seconds.
5. Start the engine, and shift to M position. Start the vehicle off in 1st, drive at 19 mph (30 km/h) for 10 seconds, shift to 2nd gear, drive at 19 mph (30 km/h) for 10 seconds, then decelerate to a stop.
6. Repeat step 5.
7. Recheck for DTC P0745.
Does the OBD II scan tool indicate code P0745?
YES - Replace the transmission assembly.
NO - The problem has been corrected..