Door Lock Knob Switch
Door Lock Knob Switch Test1. Remove the driver's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the No.1 and No.3 terminals:
- There should be continuity when the door lock knob switch is in the LOCKED position.
- There should be no continuity when the door lock knob switch is in the UNLOCKED position.
4. Check for continuity between the No.1 and No.2 terminals:
- There should be continuity when the door lock knob switch is in the UNLOCKED position.
- There should be no continuity when the door lock knob switch is in the LOCKED position.
5. If the continuity is not as specified, replace the driver's door lock actuator.