Mainshaft, M/T

Mainshaft	End play	Standard or new	0.11 - 0.17 mm
		Service limit	Adjust
	Diameter of bushing surface	Standard or new	20.80 - 20.85 mm
		Service limit	20.75 mm
	Diameter of distance collar	Standard or new	31.984 - 32.000 mm
		Service limit	31.93 mm
	Diameter of ball bearing contact area (clutch housing side)	Standard or new	27.977 - 27.990 mm
		Service limit	27.92 mm
	Diameter of needle bearing contact area	Standard or new	38.984 - 39.000 mm
		Service limit	38.93 mm
	Diameter of ball bearing contact area (transmission housing side)	Standard or new	27.987 - 28.000 mm
		Service limit	27.93 mm
	Runout	Standard or new	0.02 mm Maximum
		Service limit	0.05 mm
Mainshaft 3rd, 4th and 5th gears	I.D.	Standard or new	44.009 - 44.025 mm
		Service limit	44.08 mm
	End play	Standard or new	0.06 - 0.16 mm
		Service limit	0.25 mm
	Thickness	Standard or new	23.92 - 23.97 mm
		Service limit	23.80 mm
Mainshaft 6th gear	I.D.	Standard or new	40.009 - 40.025 mm
		Service limit	40.08 mm
	End play	Standard or new	0.06 - 0.16 mm
		Service limit	0.25 mm
	Thickness	Standard or new	23.92 - 23.97 mm
		Service limit	23.80 mm
Mainshaft 4th and 5th gears distance collar	I.D.		Standard or new	32.00 - 32.01 mm
			Service limit	32.02 mm
	O.D.		Standard or new	38.989 - 39.000 mm
			Service	38.94 mm
	Length	A	Standard or new	51.95 - 52.05 mm
		B	Standard or new	24.03 - 24.08 mm
MBS distance collar (5 speed model only)	I.D.		Standard or new	28.00 - 28.01 mm
			Service limit	28.02 mm
	Length		Standard or new	24.03 - 24.08 mm
Mainshaft 6th gear distance collar (6 speed model only)	I.D.		Standard or new	28.00 - 28.01 mm
			Service limit	28.02 mm
	O.D.		Standard or new	34.989 - 35.000 mm
			Service limit	34.940 mm
	Length		Standard or new	24.03 - 24.08 mm