Timing Belt Tensioner: Service and Repair
Timing Belt Adjuster Removal1. Remove the timing belt.
2. Remove the auto-tensioner.
3. Remove bolt (A), then remove the timing belt adjuster (B) and collar (C).
Timing Belt Adjuster Installation
1. Use a hydraulic press to slowly compress the auto-tensioner. Insert a 2.0 mm (0.08 in.) pin through the housing and the rod.
NOTE: The compression pressure should not exceed 9,800 N (1,000 kgf, 2,200 lbs.).
2. Install the timing belt adjuster.
Belt Tensioner Installation and Torque:
3. Install the auto-tensioner.
4. Install the timing belt.