Lighting - High Mount Brake Light Cover Loose
06-024September 1, 2006
Applies To:
2004-05 TL - ALL
*2006 TL - From VIN 19UUA6...6A000001 thru 19UUA6...6A061378*
High Mount Brake Light Cover Material Comes Loose
(Supersedes Service Bulletin 06-024, dated August 23, 2006, to update the information marked by asterisks)
SYMPTOM
The material on the high mount brake light cover is loose or bubbling.
PROBABLE CAUSE
The adhesive was improperly applied during manufacturing.
CORRECTIVE ACTION
Replace the high mount brake light cover.
PARTS INFORMATION
High Mount Brake Light Cover:
Moon Lake Gray, NH528L -
P/N 83206-SEP-A00ZA
Light Tan, YR167L -
P/N 83206-SEP-A00ZB
Light Cream, YR240L -
P/N 83206-SEP-A00ZC
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Operation Number: 714150
Flat Rate Time: 0.2 hour
Failed Part: P/N 83206-SE P-A00ZA
Defect Code: 02502
Symptom Code: 03220
Template ID: 06-024A (Moon Lake Gray)
06-024B (Light Tan)
06-024C (Light Cream)
Skill Level: Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1. Pull down on the high mount brake light cover to release the four clips.
2. Clean the rear window, and install the new high mount brake light cover in the reverse order of removal.
Disclaimer