Clutch: Specifications
Clutch pedalHeight from floor 191 mm (7.52 inch)
Stroke 130 - 140 mm (5.12 - 5.51 inch)
Play 10 - 18 mm (0.39 - 0.71 inch)
Disengagement height from floor 90.5 mm (3.56 inch) minimum
Flywheel
Runout on clutch mating surface
Standard or new 0.05 mm (0.002 inch) maximum
Service Limit 0.15 mm (0.006 inch)
Clutch disc
Rivet head depth
Standard or New 1.0 mm (0.039 inch)
Service Limit 0.2 mm (0.008 inch)
Thickness
Standard or New 8.68 - 9.53 mm (0.342 - 0.375 inch)
Service Limit 7.2 mm (0.28 inch)
Pressure plate
Warpage
Standard or New 0.03 mm (0.001 inch) maximum
Service Limit 0.15 mm (0.006 inch)
Height of diaphragm spring fingers measured with special tool and feeler gauge
Standard or New 0.6 mm (0.02 inch) maximum
Service Limit 0.8 mm (0.03 inch)
Release the clutch pedal 3 - 8 mm (0.39 - 0.63 inch)
Be careful not to damage the pressure plate (A). Tighten (180° apart) the pressure plate mountings bolts (B) in a star pattern in several steps.
PRESSURE PLATE MOUNTING BOLT TORQUE 25 Nm (2.6 kgf-cm, 19 ft. lbs.)
Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps