Shift Arm Clearance Inspection

Shift Arm Clearance Inspection





1. Measure the clearance between the shift arm (A) and shift piece (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.
Standard: 0.05 - 0.25 mm (0.002 - 0.010 inch)
Service Limit: 0.5 mm (0.020 inch)





2. Measure the width of the shift arm.
- If the width is not within the standard, replace the shift arm.
- If the width is within the standard, replace the shift piece.
Standard: 13.9 - 14.0 mm (0.54 - 0.55 inch)