Voice Control System Operation

The navigation system features a voice control system. This system uses voice recognition to permit hands- free operation of most of the navigation system, audio system, and climate control system functions.

The voice control system consists of the TALK and BACK buttons on the steering wheel, and a microphone on the ceiling. The audio speakers are used for voice prompts.

NOTE:
The front speakers are muted when the voice for the navigation system is providing guidance, and all speakers are muted when using the TALK and BACK buttons.

TALK button - Press this button to activate the voice control system to accept voice commands.

BACK button - This button has the same function as the CANCEL button. Press this button to return to the previous display. When the previous display appears, the system prompts you to give a command and sounds a beep. Press the TALK button to issue your next command.

Microphone - Receives voice commands and transmits them to the navigation unit for interpretation.

Using the Voice Control System

The voice control system is activated with the TALK button. To control the navigation system, the audio system, or the climate control system by voice, press and release the TALK button, then pause a moment before you give a voice command. Once the voice control system understands your command, it updates the proper system, and, depending on the next screen may prompt you for additional commands.

NOTE:
To view a complete listing of the voice commands, refer to the Navigation System Manual, or press the INFO button and select Voice Command Help.

Improving Recognition

To achieve optimum voice recognition, follow these guidelines:

^ Make sure the correct screen is displayed for the voice command you are giving. Refer to the Quick Start Guide or the Navigation System Manual.

^ Close the windows and the moonroof.

^ Set the fan speed to low (1 or 2).

^ Adjust the air flow from the vents so that it does not blow against the microphone on the ceiling.

^ Pause after pressing the TALK button, then give a voice command.

^ Give a voice command clearly in a natural speaking voice without pausing between words.

^ If the system cannot recognize your voice command, speak louder.

^ If the microphone picks up voices other than yours, the system may not interpret your voice commands correctly.

^ If you speak a command with something in your mouth, or your voice is too husky, the system may not interpret your voice commands correctly.