B1610

DTC B1610: Keyless Access Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)

1. Clear the DTCs with the HDS.
2. Touch the door outer handle switch to lock the door.
3. Check for DTCs with the HDS.

Is DTC B1610 indicated?

YES - Go to step 4.

NO - Intermittent failure. The system is OK at this time. Check for loose or poor connections.

4. Check for DTCs with the HDS.

Are DTCs B1011, B1060, B1205, B1405, B1805, and B2160 also indicated?

YES - Go to the Gauge Control Module Input Test. Gauge Control Module Input Test

NO - Replace the keyless access control unit.